AAC-All Aluminum Conductor

AAC-All Aluminum Conductor

Bare Overhead Conductor
Standard: BS215, BS2627, BS50182 Construction: Aluminum 1350 wires are concentrically stranded and wrapped helically around a central wire. Each successive layer has six wires more than the previous underlying layer. Outer layer is right hand lay and reversed in successive layers. Application: The conductors are suitable for use in spans on wood poles, transmission towers,and other structures where tensile strength and temperature ratings are not required. Application range from extra high voltage(EHV) transmission lines to sub-service spans at distribution or utilization voltages on private premises. AAC(All aluminum conductor) is the most economical bare overhead conductor due to its lighter weight. It offers easier handing during installation and use of simpler fittings. The conductor is corrosion resistant due to its homogeneous construction.
Read More
AAAC-All Aluminum Alloy Conductor

AAAC-All Aluminum Alloy Conductor

Bare Overhead Conductor
Standard: ASTM B398, B399. Construction: Standard 6201-T81 high strength aluminum conductors, conforming to ASTM Specification B-399, are concentric-lay-stranded, similar in construction and appearance to 1350 grade aluminum conductors. Standard 6210 alloy conductors are similar to other alloy conductors commercially known as Ardival, Aldrey or Almelec. They were developed to fill the need for an economical conductor for overhead applications requiring higher strength than that obtainable with 1350 grade aluminum conductors, but without a steel core. The DC resistance at 20 °C of the 6201-T81 conductors and of the standard ACSR of the same diameter are approximately the same. Conductors of the 6201-T81 alloys are harder and , therefore, have a greater resistance to abrasion than conductors of 1350-H19 grade aluminum. Application: Used as bare overhead conductor for primary and secondary…
Read More
ACSR-Aluminum Conductor Steel Reinforced

ACSR-Aluminum Conductor Steel Reinforced

Bare Overhead Conductor
Standard: BS215, BS EN50182, BS4565. Construction: Aluminum 1350 wires and the steel cores are concentrically stranded and wrapped helically around a central wire. The additional corrosion protection is available through the application of grease to the cores or infusion of the complete cable with grease. Application: The conductors are suitable for use in all practical spans on wood poles, transmission towers,and other structures. Application range from extra high voltage(EHV) transmission lines to sub-service spans at distribution or utilization voltages on private premises. ACSR(Aluminum Conductor Steel Reinforced) has a long service record because of its economy ,dependability, and strength to weight ratio. The combined light weight and high conductivity of aluminum with strength of the steel cores enable higher tensions ,lesssag,and longer spans than any alternative.
Read More
GSW-Galvanized Steel Wire

GSW-Galvanized Steel Wire

Bare Overhead Conductor
Standard: BS183. Construction: The single Steel wires are concentrically stranded and wrapped helically around a central wire. Application: The galvanized single steel wires or stranded steel wires are suitable for cores of ACSR to improve its tensile strength. And they can also be used in the aerial transmission line as the line material of ground connection to avoid the lightning strike.
Read More
ACSR/AW-Aluminum Conductor Steel Reinforced

ACSR/AW-Aluminum Conductor Steel Reinforced

Bare Overhead Conductor
Standard: ASTM B230, B502, B549. Construction: Aluminum Alloy 6201 wires and the steel cores are concentrically stranded and wrapped helically around a central wire. The additional corrosion protection is available through the application of grease to the cores or infusion of the complete cable with grease. Application: The ACSR/AW conductors are also suitable for use in all practical transmission towers,and other structures. Application range from extra high voltage(EHV) transmission lines to sub-service spans at distribution or utilization voltages on private premises as like as ACSR. ACSR/AW(Aluminum Conductor Aluminum-Clad-Steel Reinforced) has also a long service record because of its economy ,dependability, and strength to weight ratio. The combined light weight and high conductivity of aluminum with strength of the steel cores enable higher tensions ,lesssag,and longer spans than any alternative as…
Read More
ACS-Aluminum Clad Steel Wire

ACS-Aluminum Clad Steel Wire

Bare Overhead Conductor
Standard: ASTM B415,B416. Construction: Aluminum clad steel strand is composed of stranded aluminum clad steel wires. Application: Specified by power utilities for use in overhead transmission line conductors.Used by conductor manufacturers as the strength member for ACSR and ACSS cables Replaces galvanized, aluminized or misch metal cores when corrosion is a concern.
Read More