Covered Line Wire

Covered Line Wire

Insulated Overhead Cable
Standard: ASTM B-230, B-231, B-232 and B-399 ,ICEA S-61-402 and S-66-524 Standard Application: Covered line Wire is used primarily for overhead secondary distribution lines. It is not an electrically insulated conductor and is treated as bare conductor when installed. The code words as given apply to conventional polyethylene line wire. Construction: The conductors are 1350-H19 aluminum ,6201-T81 Aluminum Alloy , or ACSR conductors, concentrically stranded and covered for weather proofing with polyethylene, high density polyethylene(HD) or crosslinked polyethylene(XLPE).
Read More
Duplex Service Drop Wire

Duplex Service Drop Wire

Insulated Overhead Cable
Standard: ASTM B230, B231, B232 and B-399 ,B498,ICEA S-76-474 Application: Primarily used for 120 volt overhead service applications such as street lighting,outdoor lighting,and temporary service for construction. To be used at voltage of 600 volts phase-to-phase or less and at conductor temperatures not to exceed 75°C for polyethylene insulated conductors or 90°C for crosslinked polyethylene(XLPE) insulated conductors. Construction: The phase conductors are concentrically stranded compressed 1350-H19 aluminum and insulated polyethylene or crosslinked polyethylene(XLPE), The neutral messengers are concentrically stranded AAC, ACSR, or 6201 aluminum alloy.
Read More
Triplex Service Drop Wire

Triplex Service Drop Wire

Insulated Overhead Cable
Standard: ASTM B230, B231, B232,B399,B498, ICEA S-76-474 Standard Construction: The phase conductors are concentrically stranded compressed 1350-H19 aluminum and insulated polyethylene or crosslinkedpolyethylene(XLPE), The neutral messengers are concentrically stranded AAC, ACSR, or 6201 aluminum alloy. Application: The triplex cables are suitable for use as drop cable from a pole-mounted transformer,to the service entrance of a structure,or as secondary distribution between poles. The cables should be limited to the voltage of 600 volts phase-to-phase or less and at conductor temperatures not to exceed 75°C for polyethylene insulated conductors or 90°C for crosslinked polyethylene(XLPE) insulated conductors.
Read More
Quadruplex Service Drop Wire

Quadruplex Service Drop Wire

Insulated Overhead Cable
Standard: ASTM B230, B231, B232,B399,B498, ICEA S-76-474 Standard Application: The quadruplex cables are suitable for use as drop cable from a pole-mounted transformer,to the service entrance of a structure,or as secondary distribution between poles.The cables should be limited to the voltages of 600 volts or less (phase to phase) at conductor temperatures not to exceed 75°C for polyethylene insulation conductors or 90°C for crosslinked polyethylene(XLPE) insulated conductors. Construction: The phase conductors are concentrically stranded compressed 1350-H19 aluminum and insulated polyethylene or crosslinked polyethylene(XLPE), The neutral messengers are concentrically stranded AAC, ACSR, or 6201 aluminum alloy.The conductors are manufactured with ridges for phase identification(one conductor with one ridge,one conductor with two ridges ,one conductor is plain).
Read More
LV Aerial Bundled Conductor (ABC) Cables

LV Aerial Bundled Conductor (ABC) Cables

Insulated Overhead Cable
Standard: NFC 33 – 209 Application: Aerial Bundle Cable (ABC cable) is a very innovative concept for overhead power distribution as compared to the conventional bare conductor overhead distribution system. It provides higher level of safety and reliability, lower power losses and ultimate system economy by reducing installation, maintenance and operative cost. Tano Cable LV Aerial Bundle Cables are designed to supply 600/1000 volt aerial service for temporary service at construction sites, as a service drop (power pole to service entrance), as a secondary cable (pole to pole) or street lighting. This over-head cable provides reinforced insulation acc. IEC 61140 and fulfill therefore Class II acc. IEC 61140. It is not flame retardant. But this could be if requested change to a flame retardant cable. Construction: Conductor: Aluminium conductor, round…
Read More
MV Aerial Bundled Conductor (ABC) Cables

MV Aerial Bundled Conductor (ABC) Cables

Insulated Overhead Cable
Standard: Basic design to IEC 60502 standard. Construction: Phase Conductor: Circular compacted stranded H68 aluminium to BS2627. Conductor Screen: Extruded semi-conductive layer. Insulation: XLPE. Insulation Screen: Extruded semi-conductive layer. Metallic Screen(optional): Copper wire screen or copper tape screen. Separator: Semi-conductive swellable tape. outer Sheath: HDPE. Support Conductor: Galvanized steel wires. Assembly: Three XLPE insulated screened cores are bundled around the galvanized steel wires in a right hand lay. Application: Aerial bundled cables are mainly used for secondary overhead lines on poles or as feedes to residential premises.
Read More